Keep your nutrients dark
Light breaks down iron chelates! Because of this, it is very important to ensure that no Ultra Violet light falls on the nutrient solution. Light also causes algae to grow in the nutrient solution, which can lead to blockages. Furthermore, algae can take up nutrient elements and cause nutrient deficiencies to occur.
Amounts of nutrients
Keep note of the amounts of nutrients and additives you add to each tank of nutrients you mix. You then have a good starting point for the next time!
Nutrient tank
Take your time diluting and adjusting your nutrient tank! This is essential for the growth, flowering and development of the plants and will yield the best results.
Use prepared nutrient solution quickly
Not only the plants, but also micro-organisms really prosper in a diluted solution of Bio Vega and Bio Flores. It is advisable to use the prepared solution within 2 days.
Apply 1 to 3 times a week
It is important to shake bio-products well before use. Apply diluted nutritional solution 1 to 3 times a week.
Can you use automated dripper systems with Bio Vega & Bio Flores?
It is advisable not to use automatic dripper systems, when using Bio Vega and Bio Flores, because micro flora can develop in these systems which can cause blockages. However, if you do decide to use a dripper system then it is advised to; 1. use hoses and drippers with a broad diameter; 2. rinse the drippers with water after each feeding session.
Manual feeding of BioBOOST
BioBOOST can be administered manually and trouble-free via automatic drip irrigation and/ or via spraying the leaves. For spraying the leaves, use 2 ml BioBOOST per litre of water.
Do not acidify
Due to the presence of pH buffering fruit acids in Bio Vega and Bio Flores, the nutritional solution does not need to be acidified. Because the fruit acids serve as natural chelates, the nutrients can be absorbed across a wider pH course (up to pH 7).
BioBOOST plus CANNA PK 13/14
BioBOOST is not a nutrient but a metabolism stimulator and for that reason supports the working of other CANNA products, such as CANNA PK 13/14.
The EC of an organic fertilizer
Measuring the EC value of an organic nutrient, like you would do using a mineral fertilizer, is useless. Organic nutrients are not made of mineral salts but organically bound elements. An accurate EC value is therefore impossible to measure. Use organic fertilizers as described on the product label.
On your website/label you advice to use PK 13/14 one week while a shop recommended me to use it more weeks?
We recommend to use PK 13/14 always for one week! CANNA feeding already contains a certain amount of P and K. When the plant is in a certain stage of the flowering stage we can't increase the feed for the plant any more, so we change the PK-ratio by adding PK 13/14 for one week.
Which bacteria will Trichoderma kill?
Trichoderma (a fungus family) do not kill bacteria. Most Trichoderma protect the plant against harmful fungi. This is because they eat other fungi. They stimulates the root environment so roots can develop better and with more root hairs. As a result the plant gains more vitality.
Dilluting CANNAZYM
Never dilute more CANNAZYM than will be used within 10 days.
Foliar feeding with RHIZOTONIC
Foliar feeding with RHIZOTONIC is most efficient when this is carried out around the time that the lights go out when cultivating inside, or just before sunset when cultivating outside.
Use PK 13/14 to prevent accumulation
Prevent the accumulation of phosphate and potassium by using PK 13/14 no more than one week.
Adding acid to water
When you dilute an acidic product, always add the acid to the water, never add water to the acid, if it splashes it will cause burns on your skin or in your eyes!
Adjusting pH using pH+ or pH-
Do you want to raise or lower the pH by using pH+ or pH-? Then dilute a small amount of pH+ or pH- in a cup to make judging the dosage easier. Try to get the pH right the first time. Using a lot of pH+ or pH- one after the other will disrupt the concentration of bicarbonate in the water and affect its buffering capacities negatively.
Mixing nutrients
Measuring the nutrient reservoir works as follows: Take EC as the starting point, measure it and determine whether it should be higher or lower, based on the values shown in the instructions. Only then should you adjust the pH using pH- or pH+, if necessary. Try to get the nutrient solution’s pH value correct at the first attempt.
Adjusting pH
The products designed to adjust the pH are concentrated products. It is sometimes difficult to adjust the pH correctly in one go. To make life easier for yourself, dilute one part pH adjuster with ten parts water and use this to adjust the pH in your nutrient tank.
Don't use too much pH+ and pH-
Using too much pH+ & pH- with each other disturbs the bicarbonate concentration and the water’s buffering capacity. Also, the mutual balance between the different nutrient elements will be influenced and deficiencies could arise. Adding too much pH- or pH+ can be prevented by first diluting it with water before adding it to the solution.